Waste Cartons Are Useful. DIY Hand-Held Boxes Are Nice And Affordable.

The price of the storage cabinet is less than a few dozen yuan, and several hundred yuan, so it's better to do DIY yourself.

This kind of carton is a smooth cardboard outside, though it is a single layer, but it is quite strong.

Because the cartons are not big enough, the bottom and sides of the drawers are cut separately. They did not want to paste them. But looking at the white carton primaries in it, it is really not very beautiful.

{page_break}

Make use of tape and carton to make self-contained boxes and accept cupboards.

The bottom of the drawer and the four sides are connected on one side, some sides, three sides, and the last one is connected by the four sides and the bottom.

Cut the drawer.

{page_break}

Tape the inner surface with black tape.

Paste them in this way, and paste them on both sides.

Glue the four sides together with pparent tape.

{page_break}

Cut the four sides further, and the lines are parallel to the bottom.

A little larger on the front side, just blocking the two cut.

。

This is a whole from the front.

{page_break}

If so, both sides of the front are corrugated cross sections, which are not easy to be pasted.

A piece of cardboard is cut out like this to replace the handle of the drawer.

Tape the tape.

{page_break}

The practice of drawer sets is very detailed in the post of shoe cabinet.

First, use the scotch tape to lay the partition first, then scrape it off with the end of the paper knife.

It was thought that this step was dispensable. It was very important to do it through practice. This step is very important.

The degree of adhesion with the cardboard is more neat.

Lay the bottom drawer set.

{page_break}

hold

Put it in, ha ha, it seems that it can be completed.

Let's take an artistic photo.

Surface plaster tape.